Production of metal-powder from stainless steels

Pilot plant "Micron" is one of the leaders in the production of high-quality metal powders from stainless steels for industrial 3D printing.

The technology and equipment of the plant ensure the production of ultra-pure spherical metal powders with high bulk density from stainless steels and austenitic nickel-chromium heat-resistant, titanium and aluminum alloys.

The main industries in which Micron’s powders are used:

  • Aircraft industry;
  • Cosmonautics;
  • Nuclear power;
  • Shipbuilding.

Production of metal-powder from stainless steels

12Х18Н10Т  - Tec.con. 24.10.14-015-41587750-2022
08Х18Н10Т - Tec.con. 24.10.14-015-41587750-2022
12Х18Н10 - Tec.con. 24.10.14-015-41587750-2022 
08Х18Н10 - Tec.con. 24.10.14-015-41587750-2022
AISI 304 - Tec.con. 24.10.14-015-41587750-2022 
AISI 316  - Tec.con. 24.10.14-015-41587750-2022  
AISI 316Ti  - Tec.con. 24.10.14-015-41587750-2022 
AISI 316L  - Tec.con. 24.10.14-015-41587750-2022 
AISI 321  - Tec.con. 24.10.14-015-41587750-2022 

If you did not find the required metal powder type in the table, the technologists of “Pilot Plant “Micron” will carry out the necessary experiments and work out the issue of producing the required metal powder type.

Characteristics of metal powder produced by “Micron” Pilot Plant.

Number of spherical particles (lmax/lmin from от 1,0 до 1,2) - Not less then 90 %
Отклонение плюсовой фракции  - Not more then 5%
Oversize particles  - Not more then 10%  
Metal-powder bulk density  - Not less than 55% of the density of the source material
Humidity of the metal powder  - Not more then 0,1 %  
Protective packaging environment  - Argon 

You can find out more information and place an order by phone or by mail:

    Tarkhov Oleg Vladimirovich
Commercial Director

+7 (911) 892-86-82