Aluminum alloys
Aluminum alloys metal powder
Production of metal-powder from aluminum alloys
Pilot plant "Micron" is one of the leaders in the production of high-quality metal powders from stainless steels for industrial 3D printing.
The technology and equipment of the plant ensure the production of ultra-pure spherical metal powders with high bulk density from stainless steels and austenitic nickel-chromium heat-resistant, titanium and aluminum alloys.
The main industries in which Micron’s powders are used:
• Aircraft industry;
• Cosmonautics;
• Nuclear power;
• Shipbuilding.
At the moment, the specialists of OZ "Micron" have worked out the technology for the production of the following metal powder:
• Stainless steel;
• Nickel base;
• Aluminum alloys;
• Titanium alloys.
The production of metal powders is constantly being improved.
Aluminum alloys
| SV 1587 |
- Tec.con. 24.42.21-014-41587750-2022 |
| SV 1597 |
- Tec.con. 24.42.21-014-41587750-2022 |
| SV 1575 |
- Tec.con. 24.42.21-014-41587750-2022 |
| SV АМг6 |
- Tec.con. 24.42.21-014-41587750-2022 |
| SV 1580 |
- Tec.con. 24.42.21-014-41587750-2022 |
| ER 5356 |
- Tec.con. 24.42.21-014-41587750-2022 |
If you did not find the required metal powder type in the table, the technologists of “Pilot Plant “Micron” will carry out the necessary experiments and work out the issue of producing the required metal powder type.
Characteristics of metal powder produced by “Micron” Pilot Plant.
|
Characteristic |
Amount |
|
Number of spherical particles (lmax/lmin from 1.0 to 1.2) |
- Not less then 90 % |
| Oversize particles | - Not less then 5% |
| Undersize particles |
- Not less then 10% |
| Metal-powder bulk density | - Not less then 55 % of the density of the source material |
| Humidity of the metal powder | - Not less then 0,1 % |
| Protective packaging environment | - Argon |
You can find out more information and place an order by phone or by mail:
|
Tarkhov Oleg Vladimirovich Commercial Director +7 (911) 892-86-82 |
